This is an old revision of the document!
===== target_display ===== This target will display information about the matched packets. ==== Mode normal ==== In this mode, informations about packet headers will be displayed. Here are the parameters of this target : Parameters: ^ Name ^ Default value ^ Description ^ |skip|0|Number of headers to skip in the packet. For example, if you don't want to see the informations about the ethernet layer, set skip to 1.| |debug_level|3|Debug level used when outputting the informations.| |print_hex|no|Additionally to the header informations, target_display will show the packet content in hexadecimal.| |print_ascii|no|With this set to yes, a dump of printable characters found in the packet will be displayed.| |conntrack|no|If this is enabled, the target will save connection tracking informations for each connection. With this, you'll see all the packets of each connection. Not only the packets in a single direction.| ==== Mode connection ==== In this mode, target_display will only show header information once for each new connection. It only has the parameter skip which behaves exactly like above.